Shenzhen Yurucheng Dental Materials Co., Ltd
Professional dental zirconia blocks manufacturer
Add to Cart
1600C dental ceramic sintering furnace for zirconia
Dental Zirconia Sintering Furnace Featrues
1. Automatic Lifting up and down
2. High temperature chamber material, resistance high temperature 1700 ℃
3. Programmable controlled,after sinter, the tray will automatic come down to reduce whole heating time
4. 7" Larger Touch panel with PC interface
Technical parameters of dental zirconia sintering furnace
| Rated voltage/frequency | 220V±10%/50HZ |
| Rated power | 2000W |
| Maximum load temperature | 1600 ℃ |
| Protection level | IP21 |
| Fuse | 1) 2x~380V 16A 2) 250V 0.5A 3) 250V 1A |
| Fast fuse | ~500V 32A |
| Net weight | 62kg |
| Size | 515*320*620mm |
Precautions for sintering Furnace Use
1.Cut off the power when the furnace is not in use.
2. clean the furnace every two months.
Clean Furnace Method:
1. Break waste zirconia (white zirconia) into small pieces of 5-10 mm size.
2. Take 4-6 pieces and place them in the sintered plate (inside the crucible), cover the lid, then take 8-10 pieces and place the sintered plate in the middle of the furnace.
Sintering program:
room temperature----10℃/ min heating rate-heating to 1600℃-----insulation for two hours-------natural cooling.
Burn repeatedly until the white zirconium color permeability is normal and the furnace is clean.
