Shenzhen Yurucheng Dental Materials Co., Ltd
Professional dental zirconia blocks manufacturer
Add to Cart
Laboratory Dental Zirconia Sintering Furnace Heating Furnance For CADCAM
Introduction of Yucera Dental Heating Sintering Furance:
1. Furnace liner: we use the high pure insulation liner from Japanese factory, with high strength, low themo-conductivity.
2. Heating element: we produce the heating elements by ourselves, with high pure 99.99% molybdenum. No any polluted impurities
3. Touching screen panel, which can store 30 sintering programs. The finishedsintering program will be stored in the panel automatically. The operate can check the past sintering program in historical record
Technical Specifications of Yucera Dental Heating Sintering Furance:
| Name | Unit | Parameter |
| Working Power | KW | 1.5 KW |
| Voltage | V | AC220V,50/60Hz,Single phase |
| Max. Temperature | ℃ | 1700 |
| Continuous working temperature | ℃ | 1600 |
| Suggested heating rate | ℃/min | ≤ 20 |
| Temperature accuracy controlled | ℃ | ± 1 |
| Heating element | MoSi2 Heater | |
| Connection of heating element | In series | |
| Thermal Couples | B type | |
| Dimension of inside chamber | inch | 100x100x100mm |
