Shenzhen Yurucheng Dental Materials Co., Ltd
Professional dental zirconia blocks manufacturer
Add to Cart
Vita 16 Shades 1350mpa UT Multilayer High Translucency Zirconia Milling Disc 98x14mm
Vita Zirconia Block feature
Select the best raw materials
After dry pressed and cold isostatic: balanced pressure, better strength: better color: more translucent
More accurate scaling factor (the persistent and consistency of scaling factor between each batch)
Reliable, controllable, reusable production process to make sure produce the products with the same quality.
Every block has its barcode easy to control lot size, and it including information such as scaling factor.
Physical specifications
| Characteristics | Unit | Value |
| Density (after sintering) | g/cm³ | > 6,0 |
| CTE (25 – 500°C) | 10⁻⁶ K⁻¹ | 10.5 |
| Fracture toughness(SEVNB) | [MPa√m] | > 10 |
| Fracture toughness (SEPB) | MPa√m] | 4,0 |
| Flexural strength | [Mpa] | 1350 |
| E-Modulus | [GPa] | > 200 |
| Translucent rate | % | 43 |
How to Milling our Vita Zirconia Block
Pre-sintered zirconia material has an inherent shrinkage rate associated with each production. This number of shrinkage rate must be input into the milling preparation software to ensure the accuracy of the eventual restoration.
When milling our zirconia, always follow these general guidelines:
Only use sharp end mills with carbide or diamond coating.
Do not use any restoration that has chips or cracks. Remove the units from the disc using a handpiece with a diamond-coated bur.
Smooth the support areas with a medium-grit rubber polishing wheel.
Remove any residual zirconia dust with an art brush.
If a wet mill is used make sure all the zirconia is completely dry before sintering. Air dry for at least 15 minutes prior to sintering. Damp zirconia will crack if placed in the sintering oven.
UT Multilayer is 1350mpa zirconia with great high translucency, the color is also gradient gives natural result.
No coloring and porcelain is needed. Time saving materials.
Advantages
Perfect fit
Stable scaling factor
Imagination permeability coloring, not only stay on surface
Strength and translucent better than any other similar products.
Operate fastly, save cutting knives.
Professional service and supporting
Senior R&D team ensure the continued excellence of our material.